SKU: RO-PLUS450

PLUS COMMERCIAL 450 GPD REVERSE OSMOSIS SYSTEM

Sale price$2,899.95 USD

  • 450 GPD Commercial Plus Model
  • Super high flow Thin Film composite TFC membrane
  • Liquid-filled Inlet and outlet pre-filter gauges
  • Liquid-filled system pressure gauge
  • Stainless steel fixed waste/recycle flow control
  • Pressurized tank pressure gauge
  • 20 Inch 5 micron carbon and sediment filters
  • Storage tank pressure switch
  • Feed water low-pressure switch
  • Contaminant rejection 95-99%
  • Designed, Assembled, and Lab Tested in the USA
  • Direct from Original Manufacturer

Other Premium Features Equipped

  • One 20 Inch 5 micron sediment pre-filter
  • One 20 Inch 5 micron carbon block pre-filter
  • Stainless steel membrane housing
  • Super high flow Thin Film composite TFC membrane
  • Powder-coated premium steel frame
  • Feed water inlet solenoid valve
  • High-pressure nylon tubing
  • High-pressure brass comp. fittings
  • 110 volt-50/60 hz
  • 1/2 hp motor (3/4 hp for 800 GPD model)
  • Rotary vane pump

This is our most durable reverse osmosis system with unmatched value in quality, convenience, and price. NSF-grade high quality parts are used to build this tough system. All APEC commercial RO systems are wet tested before shipment, and are delivered with individual quality assurance reports to show actual performance data on outputs and rejections.

Explanation of Standard Features:

Liquid-filled system pressure gauge

This gauge is filled with glycerin. The "liquid" prevents gauge needle vibration.

Liquid-filled Inlet/Outlet pre-filter gauges

These gauges monitor the pressure BEFORE and AFTER the system pre-filters. This allows you to know when to change out the pre-filters. A pressure differential of about 15 psi between the two gauges indicates the filters should be changed. Example: Pre-filter IN pressure is 50 psi and Pre-filter OUT psi is 35. This is a differential pressure of 15 psi.

Stainless steel fixed waste/recycle flow controls

The fixed flow control devices are stainless steel flat plates with a small hole drilled in the center. This flow control feature regulates waste water and recycle flows. The Commercial PLUS RO model is pre-set to obtain a 50% feed flow recovery. This means that for every gallon of product water produced, 1 gallon flows to the drain. Fixed flow control makes certain the recovery rate is tamper proof.

Storage tank pressure switch

All Commercial PLUS RO models come standard with a bladder (pressurized) tank pressure switch. This means that the Commercial PLUS RO system is set up for product water to be stored in a pressurized storage tank only. If you are using an open (atmospheric) tank, you will require the optional float switch. The pressure settings on the tank pressure switch will make the Commercial PLUS RO system turn off at 50 psi and turn on at 30 psi in the pressurized storage tank.

Feed water inlet solenoid valve

This solenoid valve turns the water supply to the Commercial PLUS RO system OFF when the storage tank is full and turns ON when the storage tank needs more water.

Feed water low pressure switch

This is a safety feature designed to make sure there is at least 30 psi being delivered to the Commercial PLUS RO system before the motor starts. This switch protects the pump from running dry due to no feed water supply.

Rotary vane pump

This pump provides the necessary operating pressure (approx. 180 to 200 psi) to the RO membrane.

Low pressure switch

This is a safety feature designed to make sure there is at least 30 psi being delivered to the plus commercial RO system before the motor starts. This switch protects the pump from running dry due to no feed water supply.

24 volt level control circuit

Low voltage is supplied to the float switches for safety reasons.

Explanation of Optional Features:

Float switch for atmospheric storage tank

If you intend to store the RO water in an atmospheric (open storage) water tank, a float switch is needed. This option cannot be used with a pressurized storage tank.

TDS digital monitor, remote mount

Customer may select this option to continually monitor the Total Dissolved Solids in the product water.

Product and waste flow meters

Monitors product and waste water flow in GPM or GPH.

220 volt-50/60 hz

The Commercial PLUS RO system is standard 110v power. Select this option if you prefer 220v.

FEED WATER REQUIREMENTS: OPERATING PARAMETERS:

Temperature 85 DegreeF
maximum pH range 3-11

Input Pressure 40-80 psi maximum
Operating pressure 200 psi maximum

hardness over 10 gpg should be softened.

TDS 2000 ppm maximum. Iron 0.5 ppm maximum.

Turbidity should be removed. Hydrogen sulfide must be removed. Silica needs to be less than 125 ppm in the concentrate stream, anti-scalant should be considered for any levels over 75 ppm.

Water recovery is factory set at 50%. Flow rates are determined by membrane manufacturer's testing criteria of 1500 ppm NaCl solution @ 77 DegreeF water temperature and 225 psi at 10-15% recovery.

Actual flow rates may vary depending on the pre-treatment used, water conditions, membrane array, and applied pressure.

RO Membrane Nominal Rejection Guide

Giardia cysts Cryptosporidium cysts
E.coli bacteria Fecal bacteria
Arsenic (+3/ +5) Sodium Chloride NaCl
Sodium Nickel
Potassium Zinc
Calcium Silica SiO2
Magnesium Cadmium
Iron Silver
Aluminum Mercury
DDT PCB
Chlorinated Pesticides Radium
Chromium (+3 /+ 6) Glucose
Chloride Copper
Bicarbonate Sulfate
Nitrate 3 Chromate
Fluoride Barium
Silicate Ammonium
Phosphate Lead
Supreme Quality Banner Mobile