Home Water Leak Detection Systems

Home Water Leak Detection Systems

IMPORTANCE OF RESIDENTIAL WATER LEAK DETECTION

The more time that passes with an undetected water leak, the more potential damage will take place. Unchecked water leaks may cause expensive and dangerous problems such as mold and fungi growth and damage to important home structures and household furnishings. A water leak detector is a device that detects the presence of water in an area where it shouldn't be, such as a basement, bathroom, or kitchen, ultimately helping to prevent the costly damage a leak would cause to your home and health.

HOW DOES A LEAK DETECTOR WORK?

There are several types of water leak detectors, but most work by using sensors to detect water and then sending an alert to a monitoring system or directly to the homeowner. Mechanical turbines or ultrasonic sensors are the most common methods of measuring water flow in residential water leak detection systems.

HOW DO I FIND OUT WHERE MY WATER IS LEAKING FROM?

It’s important to place the water leak detector in the right location. Typically, it should be placed in an area where water is likely to accumulate, such as near a water heater, washing machine, or under a sink. When in doubt, follow your senses. If you sense something off in your home that could indicate a water leak, it’s always better to be safe than sorry.

HOW DO I USE A WATER LEAK DETECTOR?

Begin by moving the water leakage detector slowly – about three inches per second – over the area of concern, from low to high, noting specific areas where the leak controller stops beeping. Repeat this process until you are able to pinpoint the exact locations where water leaks may be occurring.

4 Items

Set Descending Direction
  1. Single Station Leak Controller System for POE Water Appliances - 1 Sensor
    $179.00

    Single Station Leak Detection System for POE Water Appliances

    Detects leaking water pipes or Point-of-Entry fixtures in residential or commercial structures. Fully wireless, automatically operated unit that closes the water supply of individual water appliances. Consists of 1 motorized 1" brass ball valve with manual override wired with 1 sensor on the ground to quickly shut off the water supply if a leak is detected.

    Learn More
  2. Multiple Station Leak Controller System for Up to 6 Appliances - 6 Sensors
    $559.00

    Whole House Leak Detection System for Multiple Appliances & Stations

    Detects leaking water pipes or fixtures for up to 6 different locations in residential or commercial structures. Fully wireless, automatically operated unit that closes the central main water supply. Consists of 1 motorized central 1" brass ball valve with manual override and 6 wireless R/F battery operated discs and 1 central main control box with Graphic LCD screen. Whenever a leak is detected by one of the 6 sensors, the unit will automatically shut off the main water supply, making it the perfect whole house water protection solution.

    Learn More

4 Items

Set Descending Direction
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.