SKU: RO-PRO4800

PRO COMMERCIAL 4800 GPD REVERSE OSMOSIS SYSTEM

Sale price$6,999.95 USD

  • 4800-5600 GPD Commercial Pro Model
  • Stainless steel multi-stage pump
  • Stainless steel membrane housing
  • Thin film composite TFC membrane
  • 20 Inch 5 micron BB Sediment pre-filter
  • Liquid-filled high pressure gauge
  • Adjustable stainless steel waste needle valve
  • Fused Off/On safety switch control
  • Electrical dual level float switch
  • Contaminant rejection 95-99%
  • Designed, Assembled, and Lab Tested in the USA Made in USA
  • Direct from Original Manufacturer

Premium Features Equipped

  • Powder-coated steel frame
  • Feed water inlet solenoid valve
  • High-pressure nylon tubing
  • High-pressure brass comp. fittings
  • Product and waste flow meters (Recycle valve & pre-filter guages included)
  • 30 amp motor contactor
  • 110 volt-60 hz or 220 volt-60 hz

This is our most durable reverse osmosis system with unmatched value in quality, convenience, and price. NSF-grade high quality parts are used to build this tough system. All APEC commercial RO systems are wet tested before shipment, and are delivered with individual quality assurance reports to show actual performance data on outputs and rejections.

Explanation of Standard Features:

Stainless steel multi-stage pump

Sometimes referred to as a "shotgun pump", this pump uses multiple stages of impellers to create pressure for the membrane. The impellers of the pump are glass-filled Noryl with poly carbonate diffusers. The pump housing, including the inlet and outlet ports are constructed of stainless steel.

Liquid-filled
high pressure gauge

This gauge is filled with glycerin. The "liquid" prevents gauge needle vibration.

Stainless steel adjustable waste needle valve

The waste valve controls the system operating pressure (150-200 psi).

Product and waste
flow meters

This option allows customer to monitor the product and waste flow rates.

Feed water inlet
solenoid valve

This solenoid valve turns the water supply to the PRO Commercial RO system OFF when the storage tank is full and turns ON when the storage tank needs more water.

Fused Off/On safety switch

There is a switch box mounted on the PRO Commercial RO system and is fused to protect the wiring from starting on fire in case of a motor problem.

Flow switch to protect from low/no feed
water pressure

This switch will determine if there is enough water flow to the PRO Commercial RO system to allow the pump to run. It will protect the pump from running dry due to no feed water supply.

Float switch for atmospheric storage tank

A float switch will automatically start the PRO Commercial RO system when the atmospheric (open storage) water tank needs water and stops the PRO Commercial RO system when the tank is full.

30 amp contactor

The contactor is a switch that controls power to the motor.

Recycle valve

This option allows the system to recycle a portion of waste water back into the PRO Commercial RO system to obtain a higher feed flow recovery (up to 60%).

Explanation of Optional Features:

Tank pressure switch

The PRO Commercial RO system can be set up for a pressurized water storage tank. If this option is selected, it is important that the air pressure on the storage tank is set at 25 psi.

Liquid-filled
Inlet/Outlet
pre-filter gauges

These gauges monitor the pressure BEFORE and AFTER the system pre-filters. This allows the customer to know when to change out the pre-filters. A pressure differential of about 15 psi between the two gauges indicates the filters should be changed. Example: Pre-filter IN pressure is 50 psi and Pre-filter OUT psi is 35. This is a differential pressure of 15 psi.

TDS digital monitor

Customer may elect this option to continually monitor the Total Dissolved Solids in the product water.

50 hz electrical

Electrical supply of 50hz is common in Europe, South America, Africa, Middle Eastern, Asia and parts of Japan. (USA electrical supply is 60hz)

220 volt- 60 hz

The Commercial PRO RO system is standard 110v power. Select this option if you prefer 220v.

Shipping crate

Overseas shipments require extra protection. Customer will need this optional wood shipping crate.

FEED WATER REQUIREMENTS: OPERATING PARAMETERS:
Temperature 85 DegreeF maximum pH range 3-11 Input Pressure 40-80 psi maximum
Operating pressure 200 psi maximum

Hardness must be removed.

TDS 2000 ppm maximum.

Iron 0.5 ppm maximum.

Turbidity should be removed.

Hydrogen sulfide must be removed.

Silica needs to be less than 125 ppm in the concentrate stream, anti-scalant should be considered for any levels over 75 ppm.

Water recovery up to 60% and is field adjusted by customer. (Only under certain conditions can the recovery be set higher than 50%)

Flow rates are determined by membrane manufacturer's testing criteria of 1500 ppm NaCl solution @ 77 DegreeF water temperature and 225 psi at 10-15% recovery.

Actual flow rates may vary depending on the pre-treatment used, water conditions, membrane array, and applied pressure.

RO Membrane Nominal Rejection Guide

Giardia cysts Cryptosporidium cysts
E.coli bacteria Fecal bacteria
Arsenic (+3/ +5) Sodium Chloride NaCl
Sodium Nickel
Potassium Zinc
Calcium Silica SiO2
Magnesium Cadmium
Iron Silver
Aluminum Mercury
DDT PCB
Chlorinated Pesticides Radium
Chromium (+3 /+ 6) Glucose
Chloride Copper
Bicarbonate Sulfate
Nitrate 3 Chromate
Fluoride Barium
Silicate Ammonium
Phosphate Lead