Single Station Leak Controller System for POE Water Appliances - 1 Sensor

  • Protects Your Home & Possessions from Water Damage by Monitoring High Risk POE Appliances

  • Fully Automatic, Closes the Central Main Water Supply when a Leak is Detected

  • Motorized Brass Ball Valve with Manual Override Wired to Quickly Shut-Off Incoming Water Supply

  • 1 Drip Sensitive Sensor Disc Included

  • Runs Self-Test for Battery Life

  • Equipped with Audible & Visual Alarm Indication

  • LED Indicator for Low Battery Warning

  • Easy Installation and System Operation

  • Listed Price:$179.00


    Monitors & Protects Against Major Water Appliance Leaks

    Whole house water detecting system - locationOld point-of-entry (POE) water appliances and pipes are prone to leak or burst, wasting water and causing damage to your home. APEC's Single Station Leak Detector/shut-off device is an active point-of-monitoring leak detection system that notifies homeowners with an alarm signal and automatically shuts off the water supply within a few seconds of a developing leak at a single monitored location. The quick detection and shut off capabilities of this system helps prevent more water from flowing and causing further damage and makes for a great low cost insurance policy for higher risk installations.

    A smart home leak prevention system, the Single Station Detector is equipped with the latest technology to monitor and control water flow to primary appliances. It consists of one motorized 1" brass ball valve with manual override wired with 1 sensor on the ground to close the water supply whenever a leak is detected. The system works either on batteries or electricity and can also run self-tests and indicate when battery replacement is needed.

    Designed to be used on all critical water appliances:

    • Water heater
    • Water softener
    • Toilets
    • Dishwasher
    • Humidifiers
    • Lavatories
    • Refrigerators
    • Washing Machine
    • Water Filtration Systems
    • Sink
    • Garage
    • Fish Tank
    • Basement
    • Sump Pump
    • House Plants
    • Industrial Coffee Machines
    • Ice maker or water dispensers on refrigerators

    Product Features

    • Fully automatic wireless R/F unit
    • Battery or electrical operated
    • 1 motorized 1" NPT full port brass ball valve
    • Manual override on valve
    • 1 wired disc
    • Low battery indication
    • Run self-tests
    • Holiday function
    • Audible and visual alarm indication
    Whole house water detecting system

    Sensor Disk

    The water-resistant sensor disk is equipped with 3 moisture detection probes capable of detecting water flow from 1 mm to direct contact with the floor. This state of the art technology allows the system to quickly shut off the water at the earliest sign of a leak to protect against water damage to your home and possessions.
Performance & Specification

    Whole House Water Detecting System Specifications












    Whole house water detecting system

    Total Weight

    4 lbs
    A) Valve Section


    1" Full Port Brass Ball - Nickel Plated

    Working Pressure

    PN16 (250 psi), 17,24 Bar

    Working Temperature

    +21°F to +248°F


    Not for Natural Gas or LPG

    Thread on Valve

    1" Threaded Female ends BSP


    2 Brass fittings converting 1" BSP to 1" NPT Female Adaptors
    Top Section on Valve


    Motorized unit with manual override wheel

    Buttons & LED Lights

    Membrane keypad label with 3 LED's



    Working Temperature

    -49°F to 185°F

    External Extension

    Insert Kraan: RJ 6 Pin type Modular Jack; Insert Socket: RJ 6 Pin type Modular Plug


    4 x (1, 5V) AA Alkaline batteries and/or 1 universal world adapter with interchangeable plugs switching connectors

    Input Power

    100-240V; AC~50/60Hz

    Output Power

    6, 0VDC-1, 0A
    B) Sensor Section


    Wired round shaped disc screw model


    2 core flexible cable

    Wire Cord to Top Section on Valve

    Max. 92.5"

    Working Temperature

    -49°F to 185°F

    Water Resistant

    Yes (rubber o-ring & patch)
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 49.2ms
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 59.21ms
  • bvseo-msg: HTTP status code of 404 was returned;