John Guest Feed Valve (3/8" Male x 3/8" Female x 1/4" Tube OD) (ASVPP1LF)

JOHN GUEST WORLD CONNECTIONS

John Guest has a long established reputation as a world leading manufacturer of push-in fittings, tubings, and other fluid control products. They are well-known in the industry for producing consistently high quality products with an ongoing commitment to value engineering and product development.

John Guest manages both their design and manufacturing processes in-house at their modern, custom-built facilities in the United Kingdom. Their quality line of Push-In Fittings have been designed for use with a wide range of industrial water treatment applications and systems including Water Purification, Reverse Osmosis, Ice Makers, Beverage Dispensing, Vending & OCS, R.V. and Marine, Car Washing Systems and many more.

This John Guest Angle Stop Adapter Valve is constructed of white polypropylene with food grade EPDM O-Rings and connects between your valve and riser to the main water supply line, for applications in reverse osmosis, filtration systems, automatic coffee brewers, ice-makers, and much more.

ANGLE STOP ADAPTER VALVES

• Brass with a polypropylene collet and a food grade EPDM o-ring
• NSF 51 and NSF 61
• For applications in Reverse Osmosis, Filtration Systems, Automatic Coffee Brewers, Ice-Makers, etc
• Not suitable for compressed air applications, explosive gases, petroleum spirits, and other fuels

WORKING PRESSURES AND TEMPERATURES

How to connect the angle stop adapter valve

Step1 Shut off water supply at brass/chrome supply valve.	Step2 Disconnect riser from brass/chrome supply valve.	Step3 Ensure that the sealing gasket is fully seated into the Angle Stop Valve female thread.	Step4 Install Angle Stop Adapter Valve on supply valve.	Step5 Connect the riser to the Angle Stop Adapter Valve.	Step6 Fully insert tubing into the speedfit side of the valve.	Step7 Open valves and check for leaks.