Products Filters Parts F.A.Q.s Promotions My Account View Cart
Reverse Osmosis Technlogy Water Education
& Your Health
Customer Reviews
& Testimonials
Talk to a WQA Certified
Water Specialist

No Water at Dispensing Faucet

–    Water supply is off —> Turn on the water supply, or open Needle Valve ( turn needle handle
counter colockwise)

–    Tank’s valve is closed —> Turn tank valve to an “Open” position

–    Output line is crimped —> Remove crimp

–    Incorrect installation —> See Fig.11. Verify all line connections.
–    Tank defective, no pre-charge pressure —> Set tank pre-charge to 5-7 psi.
–    ASO connection Error —> See Fig. 16A and Fig. 16B to reconnect ASO to the correct connection.

The ASO valve has 4 lines connected to it, 2 Reds and 2 Clears. C1 is labeled IN and C2 is labeled OUT on the valve. C3 and C4 are connected to the ends with the 4 screws. Please confirm connections:
•  Stage 3 Carbon:        Red tubing (point B) is connected to C1 (IN) fig.16A
•  Membrane:        Red tubing (point D) is connected to C2 (OUT) fig.16A
•  Check Valve:        Clear tubing (point E) is connected to C3 fig.16B
•  5th stage Tee inlet:    Clear tubing (point F) is connected to C4 fig.16B



Back View

Fig. 16A



Front View

Fig. 16B

About Water Quality Specialist

Speak Your Mind

Tell us what you're thinking...
and oh, if you want a pic to show with your comment, go get a gravatar!

You must be logged in to post a comment.