Harmsco Hurricane 50 GPM Single Filter Housings


  • Combination Centrifugal Separator & Up-flow Filter in One

  • Separates Dense Solids Prior to Cartridge Filtration

  • No Air Entrapment & Unfiltered Liquid By-pass During Service

  • Single Jumbo Cartridge Design for Easy Removal & Service

  • 50 GPM Commercial Filter Housing Models

  • Rugged 304 Stainless Steel Construction

  • Pressure rated to 150 psi and Hydrostatically Tested

  • Superior Electro-Polished for Higher Resistance to Corrosion

  • Individual Studs for Safe, Secure Lid Closure

  • Easy Cartridge Removal & Service with Single Compact Design

  • Extensive Choice of Cartridge Micron Ratings and Media

  • Made in USA of High Quality Components Made in USA

  • Listed Price:$1,490.00
Overview

    Details

    Top Quality Liquid Filtration Solutions

    Our Harmsco Hurricane up-flow filter housings are uniquely designed to separate dense solids prior to cartridge filtration for extended filter life, increased dirt holding capacity and reduced maintenance costs. Additionally, the patented up-flow design of these filters allows them to utilize 100% of the cartridge surface area, providing efficient filtration and improved filter life. Single cartridge filtration makes filter installation and maintenance a snap. Built with rugged stainless steel construction and electro-polished to resist corrosion, our Hurricane filters will deliver a stable supply of filtered water at a fast flow rate with high volume for all your most demanding commercial and industrial applications.

    Superior Upflow Design

    Trapped air is automatically purged from the Hurricane filter vessel due to the principle of up-flow filtration which allows filtered water to exit the filter at the highest point as it is filtered. A secure top plate prevents cross contamination of filtered and unfiltered liquid. Pressure rated to 150 psi and hydrostatically tested for safety and materials quality, Hurricane filters are suitable for commercial or industrial use anywhere in the world.

    vs.

     

    Why Should You Filter Your Water?

    Cool, clear water is the life force in manufacturing operations. It cools, cleans, and can be counted on to run pure and steady - unless it becomes contaminated with dirt and other pollutants, in which case it can gum up a system, increase the friction losses and induce erosion corrosion. Water contamination also wastes energy by increasing the demand for a higher flow rate to offset the lost capacity due to scaling. This can impede operations, lowering the thermal efficiency of the system and even impair the quality of the products being made.

    Water filtration is one of the most effective and least expensive ways to solve equipment fouling and scaling problems caused by dirty water. Heat exchangers, molds, pipes, tubing, sensors, monitors, and other parts become fouled when dirt particles in the water settle out on warm surfaces. Calcium and magnesium are the bonding elements that cement the dirt onto the equipment. Chemical analysis shows that the calcium and magnesium are less than 2%, while the rest is made up of airborne particles, rust, sand, biological organisms, and other contaminants. High concentrations of water pollutants can result in the need for costly repairs or replacement of the facility's mechanicals. Our up-flow Harmsco commercial housings are designed to deliver unsurpassed filter performance which enables longer filter runs and reduced filtration costs to keep your equipment running efficiently.

     

    Features & Benefits of the Single Filter Housing

    Single filter cartridges are easy to maintain and replace. A wide selection of specialized cartridges are available for this model to treat a wide range of commercial applications.

    Outer Chamber

    Centrifugal separation occurs in the filter's outer chamber by rotational flow and centrifugal force. Heavy solids accumulate at the bottom of the filter's outer chamber which may be purged manually or automatically.

    Inner Chamber

    Liquid flows from the outer chamber into an inner chamber where the single cartridge is located. The liquid is filtered and subsequently flows out of the filter through the standpipe and outlet fitting.

    Tangential Entry

    Liquid enters the filter tangentially to provide rotational flow and centrifugal force for particle separation.

    Rotational Flow Pattern

    System continuously "fluffs" filter cake to increase dirt and debris holding capacity to extend filter life and time between cleaning.

    Drain for Manual or Automatic Purge

    In heavy solids applications, manual or automatic valves may be used to purge solids from the outer chamber to extend filter life. Tests demonstrate approximately half of the heavy solids, such as sand, separate prior to the filtration chamber at 50 GPM.

    Fail Safe Lids with Wing Nuts

    Lids come standard with wing nuts for easy operation. Individual studs are provided for added security.

    Single "Jumbo" Cartridges

    Easy to install, remove, clean and replace.

    Couplers for Pressure Gauge

    1/4" FPT couplers are installed in inlet and outlet fittings for pressure gauges.

     

    Replacement Cartridges

    Harmsco Cartridge
    Product Code
    Compatible Filter
    Housings Models
    Nominal Micron Cartridges Dimensions
    FI-HM40-035 HUR-40-HP 0.35 9-5/8" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM40-1 HUR-40-HP 1 9-5/8" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM40-5 HUR-40-HP 5 9-5/8" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM40-10 HUR-40-HP 10 9-5/8" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM40-20 HUR-40-HP 20 9-5/8" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM40-50 HUR-40-HP 50 9-5/8" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM90-035 HUR-90-HP 0.35 19-1/2" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM90-1 HUR-90-HP 1 19-1/2" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM90-5 HUR-90-HP 5 19-1/2" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM90-10 HUR-90-HP 10 19-1/2" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM90-20 HUR-90-HP 20 19-1/2" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM90-50 HUR-90-HP 50 19-1/2" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM170-035 HUR-170-HP 0.35 30-3/4" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM170-1 HUR-170-HP 1 30-3/4" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM170-5 HUR-170-HP 5 30-3/4" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM170-10 HUR-170-HP 10 30-3/4" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM170-20 HUR-170-HP 20 30-3/4" X 7-3/4" (OD) X 3" FPT (ID)
    FI-HM170-50 HUR-170-HP 50 30-3/4" X 7-3/4" (OD) X 3" FPT (ID)

     

    Typical Applications

    • Removes Undispersed Solids
    • Removes DE Filter Carryover
    • Filters Cooling Tower Water
    • Removes Pulp from Juices
    • Protects Glue Applicators
    • Protects Instruments
    • Filters Waste Oil for Reuse
    • Removes Plastic Fines from Water
    • Protects Catalyst Beds
    • Filters Recirculating Water
    • Filters Condensate
    • Removes Particles from Coatings
    • Removes Precipitated Solids
    • Keeps Spray Nozzles Open
    • Removes Char Particles
    • Removes Oversize Particles
    • Filters Scrubber Water Filter
    • Cleans Electrolytic Solutions
    • Filters Pump Seal Water
    • Protects Reverse Osmosis Systems
    • Boiler Feed Water
    • Filters Bottle Can Wash Water
    • Protects Chillers & Air Conditioners
    • Filters Poultry & Meat Wash Water

     

    Liquid by Industry

    CHEMICALS FOOD PAPER
    Acetic Acid Corn Syrup Pigmented Coatings
    Calcium Carbonate Dextrose White Water
    Brine Lard Fresh Water
    Ethylene Clycol Jelly Clay Slurry
    Herbicides Juices Starch
    Hydrochloric Acid Milk Sugar Tio2 Slurry
    Latices Edible Oils Mill Water
    Resins Tea Liquor Dyes
    Polymers Peanut Butter Cooling Water
    Sulphuric Acid Extracts Pump Seal Water
    Cooling Tower Water Chocolates Decker Shower Water
    Pellitizer Water Soybean Concentrate Wet End Additives
    PETROLEUM MISC  
    Amine Adhesives
    Feedstocks Resins
    Reduced Crudes Solvents
    Naphtha Paints
    Fuel Oil Shampoo
    Motor Oil Dyes
    Hydraulic Oil Cooling Water
    Injection Fluids Pharmaceuticals
    Completion Fluids Beverages
    Pump Seal Water Toothpaste
    Cooling Tower Water Liquors
    Dissolved & Dispersed Oils Beer
Performance & Specification

    Single Filter Housing Specifications

    • Filter Vessel & Metal Components: 304 stainless steel, electropolished
    • Holding Rods, Lifting Rods & Standpipes: CPVC
    • Pipe Caps: CPVC
    • Rim Gaskets: EPDM
    • O-Rings: Buna-N
    • Wing Nuts: Brass
    • Bottom Seals: Natural gum rubber
    • Pressure: Rated for pressures to 150 psi (10 bar) maximum
    • Temperature: Rated to 140°F with CPVC rods, pipe caps, standpipes
    • Flow: Up to 800 GPM
      (Typical flow rates are 4-6 GPM per single length (9-3/4") cartridges)
    Harmsco Hurricane

     

    MODEL HUR-40-HP HUR-90-HP HUR-170-HP
    Flow Rate
    (U.S. GPM)
    Up to 50 Up to 100 Up to 150
    Service Height 31" 51" 72"
    Pipe Size 2" NPT 2" NPT 2" NPT
    Drain 1" NPT 1" NPT 1" NPT

     

    System Dimensions

    MODEL HUR-40-HP HUR-90-HP HUR-170-HP
    Dimension
    (A x B x C)
    19 1/2" x 14 5/8" x 13" 29 7/8" x 14 5/8" x 13" 40 1/2" x 14 5/8" x 13"
    Inlet/Outlet
    (D x E)
    12 3/4" x 3 7/16" 17 3/4" x 3 7/16" 23 5/8" x 3 7/16"
    Floor Space Req. 15" x 15" 15" x 15" 15" x 15"
    Filter Height 21" 31" 41"
    Weight 40 lbs. 51 lbs. 64 lbs.

    * It is recommended operation at 60-70% maximum flow rate for optimum performance.

     

    Water Pressure Drop

    Hurricane Filter Chart

    Pressure drop shown above is for filter housing and 20 micron filter cartridge in clean water. Data developed by NSF International.

     

Product's Review

    Write Your Own Review

    You're reviewing: Harmsco Hurricane 50 GPM Single Filter Housings

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Satisfaction
    • Reload captcha