Our FILMTEC™ 75 GPD reverse osmosis membrane elements for home drinking water are the industry’s most reliable. Advanced membrane technology and automated fabrication allow these elements to deliver consistent performance that equipment suppliers, water treatment dealers, and residential customers can rely on. These FILMTEC membranes are certified to NSF 58 standards, and they deliver excellent performance in terms of flux, salt and organics rejection, and microbiological resistance. They can operate over a pH range of 2 to 11, are resistant to compaction and are suitable for temperatures up to 45°C. Their performance remains stable over many years, even under harsh operating conditions.
Operating Limits
Membrane Type
Polyamide Thin-Film Composite
Maximum Operating Temperature
113°F (45°C)
Maximum Operating Pressure
150 psig (10 bar)
Maximum Feed Flow Rate
2.0 gpm (7.6 lpm)
pH Range, Continuous Operation
2-11
pH Range, Short-Term Cleaning
1-13
Maximum Feed Silt Density Index
SDI 5
Free Chlorine Tolerance
< 0.1 ppm
More Information
SKU
MEM-FT-75
Specification
Specification Table
APEC
Item Code
Manufacture
Item Code
GPD
(Gallon per Day)
Stabilized Salt
Rejection %
Dimensions
Weight
MEM-FT-24
TW30-1812-24
24 ~ 30
98
1.75W x 11.75L
1 lb
MEM-FT-36
TW30-1812-36
36 ~ 45
98
1.75W x 11.75L
1 lb
MEM-FT-50
TW30-1812-50
50 ~ 60
98
1.75W x 11.75L
1 lb
MEM-FT-75
TW30-1812-75
75 ~ 90
98
1.75W x 11.75L
1 lb
MEM-FT-100
TW30-1812-100
100 ~ 120
98
1.75W x 11.75L
1 lb
Permeate flow rate and salt rejection based on the following test conditions: 250 ppm softened tap water at 50 psig, 77°F (25°C), and 15% recovery.
Permeate flows for individual elements may vary +/-20%.
Minimum stabilized salt rejection is 98.0%.
bvseo_sdk, p_sdk, 3.2.1
CLOUD, getReviews, 17.36ms
REVIEWS, PRODUCT
bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
What's this? Check "Remember Me" to access your shopping cart on this computer even if you are not signed in.