1.800.880.4808
(0 item) - $0.00

You have no items in your shopping cart.

Water Quality Testing Kits

Water Quality Testing Kit

  • Hand Held Digital Water Testing Meters
  • Total Dissolved Solids Water Meter/Tester

    TDS Meter - digital water quality tester
    • TDSMETER
    • Range: 0 to 2000 ppm TDS

      Accuracy: ±5%

    • Listed Price:$39.00
    • Total Saving:$14.00
    • Sales Price:$25.00

    Easy to use hand-held digital meter to test and monitor your water quality in Total Dissolved Solids (TDS); it allows you to stay on top of your drinking water quality at all times!

  • PH Level Tester

    pH Level Tester with Replaceable Electrode
    • PHMETER
    • Range: 0.00 to 13.00 pH

      Resolution: 0.01 pH

      Accuracy: ±0.2 pH

    • Listed Price:$39.00

    This pH meter checker supplies you with fast and accurate readings from 0.00 to 13.00 pH with a resolution of 0.01 pH. Features a large easy-to-read LCD and a simple to perform 2-point calibration.

    Fast, accurate and lightweight, this compact tester offers 3000 hours of battery life so you won't have to worry about frequent battery replacement.

  • PH Level Kit

    pH Level Tester w/Electrode & 2 Buffer Solutions
    • PHKIT
    • Range: 0.00 to 13.00 pH

      Resolution: 0.01 pH

      Accuracy: ±0.2 pH

    • Listed Price:$65.00

    This portable pH testkit supplies you with fast and accurate readings that are much more precise than litmus paper and standard pH test kits. The digital meter uses an advanced pH sensitive electrode that can be easily unscrewed and replaced with a new probe when worn, thus making it one of the most durable pH meters on the market.

    This kit measures pH in a range of 0.0 to 13.0 with a resolution of 0.1 pH and comes complete with 2-point calibration solutions PH-SOL4 and PH-SOL7 for high accuracy testing.

  • 4.01 PH Buffer Solution

    4.01 pH Buffer Solution
    • PH-SOL4
    • 4.01 pH Buffer Solution

      1 x 230 mL Bottle

    • Listed Price:$15.00

    This high quality 4.01 pH buffer solution is prepared according to precise formulas and is standardized for use with your PHMETER checker or any quality tester that has been calibrated according to the NIST standards.

    This 4.01 buffer value is widely used in water purification plants, in the food industry and wherever the pH is expected to be slightly acidic.

  • 7.01 PH Buffer Solution

    7.01 pH Buffer Solution
    • PH-SOL7
    • 7.01 pH Buffer Solution

      1 x 230 mL Bottle

    • Listed Price:$15.00

    This popular 7.01 pH buffer solution is the most widely used among all buffer solutions for pH calibration. Prepared according to precise formulas and standardized for use with your PHMETER checker, this quality buffer is a NIST standardized reference solution.

    The 7.01 pH buffer value is widely used in water purification plants, in the food industry and where ever the pH is expected to be slightly acidic.

  • Replacement PH Electrode

    Replacement pH Electrode
    • PH-SPARE
    • Spare Electrodes with Cloth Junction

    • Listed Price:$25.00

    This replacement electrode for the PHMETER checker comes with a cloth junction. Easy to replace and durable, this spare electrode will deliver accurate readings for your most demanding testing applications.

  • Other Water Quality Testing Kits
  • Total Chlorine Water Testing Kits

    Total Chlorine Water Testing Kits
    • TESTKIT-CHLORINE
    • Test for Total Chlorine

      Sensitivity Range: 0-10ppm

      Total Test Time: 15-60 Seconds

    • Listed Price:$16.00

    The Total Chlorine Water Check test strip is a TMK (Thio-Michler's Ketone) Colourimetric Aperture Strip designed around patented technology to meet USEPA guidelines for screening all drinking water sources. The water quality test reports accurate results from 0.02 ppm (mg/L) to 10.0 ppm (mg/L).

    The Total Chlorine Water Check test kit makes on-site and field testing quicker and easier than current methods available. Since there are no powders or tablets to mix, no technical training is required, no hazardous chemicals are used, and water quality test results are achieved in less than 1 minute.

  • Total Hardness Level Water Testing Kits

    Total Hardness Level Water Testing Kits
    • TESTKIT-HARDNESS
    • Test for Total Hardness

      Total Test Time: 3 Seconds

    • Listed Price:$16.00

    Total Hardness test strips for water quality are the ideal solutions for many projects. This test kit is great for residential tap and well water hardness evaluation. These test strips offer a wide range of detection and are calibrated to be both sensitive and accurate.

    With their low cost and high accuracy, Total Hardness test strips will also save you valuable time. No more counting drops or waiting for laboratory results. With these hardness strips you are in control and can find out exactly where your calcium level is before it becomes a problem and what type of water softener solution you need to reduce the hardness.

  • Iron Low Range - Water Testing Kits

    Iron Low Range - Water Testing Kits
    • TESTKIT-IRON
    • Test for Iron

      Sensitivity Range: 0-50 ppm (mg/L)

      Total Test Time: 45 Seconds

    • Listed Price:$16.00

    This Iron Check test kit is designed to specifically react with Iron, without interference from other heavy metals that may be present. Say good-bye to dangerous, time-consuming wet-chemical kits that require extensive training and cost. This patented test is a simple dip-and-read test procedure that requires no technical training.

    Since there is no glass required to run the test, and since the chemical concentration is extremely low, the test is ideal for use in controlled areas. Simply dip one strip into the water for 30 seconds with a back-and-forth motion, remove the strip and shake once to remove excess water, wait 15 seconds for the color to develop, and match with the closest color match to determine your concentration of Iron.

  • Hydrogen Sulfide Water Testing Kits

    Hydrogen Sulfide Water Testing Kits
    • TESTKIT-SULFIDE
    • Test for Hydrogen Sulfide

      Sensitivity Range: 0-2ppm

      Total Test Time: 20 Seconds

    • Listed Price:$16.00

    The Low Range Hydrogen Sulfide test kit has detection limits From 0 to 2ppm (mg/L) with a low sensitivity of 0.3ppm (mg/L). With this test, the strip is inserted into the aqueous sample for 20 seconds and stirred with a back and forth motion.

    After 20 seconds, the strip is removed and discarded. The remaining discolored sample is compared to the color chart specific for this water quality test.

  • Well Water Home Testing Kits

    Well Water Home Testing Kits
    • TESTKIT-WELL
    • Test for: pH, Total Alkalinity, Total Hardness, Iron, Nitrate/Nitrite Nitrogen

      Total Test Time: Less than 1 Minute

    • Listed Price:$16.00

    Our Well Water Check Home Test Kit offers a broad range of concentrations that can be measured using this four part kit. Accurate results are obtained in under one minute for Iron, Total Hardness, pH, and Nitrate Nitrogen/Nitrite Nitrogen, making this kit ideal for the wastewater and processing industry, as well as for home use. This patented water quality test promises to be a very attractive alternative to wet chemical tests for several reasons: a mechanical reader is NOT required; the unique indicators are reactive only to their given elements without interference from surrounding materials; and accurate results are achieved in under one minute.

  • 5 Way Water Quality Testing Kits

    5 Way Water Quality Testing Kits
    • TESTKIT-5WAY
    • Testing for pH, Total Alkalinity (TA), Total Hardness (TH), Free & Total Chlorine

      Total Test Time: 30 Seconds

    • Listed Price:$16.00

    Our 5-Way water quality tester reports results for Free Chlorine, Total Chlorine, pH, Total Alkalinity, & Total Hardness – all on the same strip. Utilizing a single dip-and-read method, this tester offers accurate and reliable water quality test results in less than 30 seconds.

    Packaged in bottles of 50, this water testing kit proves that quality home water testing can be affordable.

  • Bacteria Water Testing Kits

    18 Minute Bacteria Water Testing Kits
    • TESTKIT-BACTERIA
    • Test for: Coliform and Non-Coliform Bacteria at 103 cfu/ml. Lateral flow strip.

      Total Test Time: 18 Minutes

    • Listed Price:$19.00

    The new 18 Minute Bacteria Test for water quality testing is ultra fast and effective. Other bacteria tests can take up to 48 hours to produce results, wasting valuable time and money. This easy to use dip and read test strip detects E.coli, species of Salmonella, Shigella, Enterobacter, Klebsiella and many other coliform and non-coliform bacteria.

    True to its name, this Bacteria Test can provide reliable on site results in 18 minutes, which can be used for pools, spas, drinking water, lakes, rivers and streams. Detects coliform and non-coliform bacteria at 103 cfu/ml.

  • Arsenic Low Range - Water Testing Kits

    Arsenic Low Range - Water Testing Kits
    • TESTKIT-ARSENIC
    • Test for Low Range Arsenic Sensitivity Range:150 and 300 ppb (µg/L)

      Total Test Time: 12 Minutes

    • Listed Price:$28.00

    The Low Range Arsenic test kit is the premier product in the Quick line of arsenic water quality testing kits. Yielding results in only 12 minutes, this tester combines low sensitivity with ease-of-use. Ideal for use on tap and well water for residential and commercial applications.

    With the US EPA imposing new, stricter regulations pertaining to arsenic in drinking water, many of the testing methods currently used today will be rendered inadequate in the future. This kit is designed to give you a high quality test that is good for today, tomorrow and the future. Requiring no technical expertise, the Low Range Arsenic test kit is a tool that can be used by everyone.

  • Complete Home Water Quality Testing Kits

    Complete Home Water Quality Testing Kits
    • TESTKIT-COMPLETE
    • Test for: Iron, Copper, Chloride, Total Nitrate/Nitrite Nitrogen, pH, Total Alkalinity, Total Chlorine, Total Hardness, Free Chlorine, Sulfate, Hydrogen Sulfide, Bacteria

      Total Test Time: Varies

    • Listed Price:$28.00

    The Complete Test Kit is the first water quality test kit that lives up to its name and delivers a truly comprehensive drinking water quality test.

    Measuring for Bacteria, Nitrates, Nitrites, Hydrogen Sulfide, Total Hardness, Total Alkalinity, Total Chlorine, Free Chlorine, Chloride, Copper, Sulfate, Iron, & pH, this test kit gives the user rapid, comprehensive results that help to ensure safe drinking water without sacrificing cost.