Carbon Block Media Filter 10", 0.5 Micron CFB-PB10 Series


  • 2X Chlorine Taste & Odor Reduction & High Dirt-Holding Capacity of traditional blocks

  • Lead reduction through 2000 gallons

  • 0.5 Micron Filter with the Benefits of both a Sediment and Carbon Block Filters

  • Low Pressure drop over the entire life of the cartridge

  • No Carbon Fines released into the eluent stream

  • 99.95% reduction of Cryptosporidium and Giardia cysts

  • Tested and Certified to NSF 42 Standard for material requirements

  • Manufactured Entirely from FDA-Compliant materials

  • Ideal for a wide range of residential, food service, commercial and industrial applications

  • Listed Price:$13.50
Overview

    Details

    PENTEK’s FI-CFB-PB10 filter uses advanced proprietary Fibredyne Technology to create a unique filter media that attaches powdered activated carbon onto a cellulose-free synthetic fiber matrix. As a result, this revolutionary filter cartridge can deliver two (2) times the chlorine taste & odor reduction and dirt-holding capacity of traditional block filters. Lead adsorbent material is also infused to the media to provide effective lead reduction up to 2,000 gallons, and the filter is 0.5 micron rated to remove 99.95% of cryptosporidium and giardia cysts. In addition, this block filter will not release fines into the water stream thanks to a unique post-filtration layer that is fused to the carbon/filter media blend, leaving the filtered-water clean and pure.

    Modified molded block 0.5 micron cartridges are manufactured entirely from FDA-complaint materials, making them an ideal option for a wide range of residential, food service, commercial and industrial applications. Also an economic choice for high sediment applications leading to premature plugging.The FI-CFB-PB10 filter will fit in our standard 10” x 2.5” filter housing (Link to HW-10) and treat up to 5,000 gallons of water @ 1 gpm.

    Cartridge Specifications & Performance Data

    Model

    FI-CFB-PB10

    Model

    CFB-PB10

    Part Number

    255681-43

    Diameter

    2-7/8"

    Lengths

    9-3/4"

    Flow Rate

    8.1 psi @ 1 gpm

    Cholorine Tate & Odor Reduction @gpm

    > 5,000 gallons @ 1 gpm

    Micron Rating

    0.5 micron

    Temperature Rating

    40º F to 180º F

    Filter Media

    Bonded PAC

    End Caps

    Polypropylene

    Nettings

    Polyethylene

    Gaskets

    Santoprene

    About Pentek


    PENTEK Pentair Residential Filtration is a leading provider of water quality solutions for the residential and light-commercial applications through long-standing partnerships around the world leveraging innovative, environmentally-focused and energy-saving technologies. With access to the industry’s widest range of high quality products available, PENTEK Pentair offers a broad product portfolio ranging from filter housing, filter cartridges, drinking water systems, softeners, pressure vessels and control valves, so that partners can carry the best products to meet all of the water's residential needs.

Performance & Specification

    Cartridge Specifications & Performance Data

    Model

    FI-CFB-PB10

    Model

    CFB-PB10

    Part Number

    255681-43

    Diameter

    2-7/8"

    Lengths

    9-3/4"

    Flow Rate

    8.1 psi @ 1 gpm

    Cholorine Tate & Odor Reduction @gpm

    > 5,000 gallons @ 1 gpm

    Micron Rating

    0.5 micron

    Temperature Rating

    40º F to 180º F

    Filter Media

    Bonded PAC

    End Caps

    Polypropylene

    Nettings

    Polyethylene

    Gaskets

    Santoprene

Product's Review

    Write Your Own Review

    You're reviewing: Carbon Block Media Filter 10", 0.5 Micron CFB-PB10 Series

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Satisfaction
    • Reload captcha