| |
Light Commercial Ultra Reverse Osmosis System

| |
180/240/360 Gallons/day Commercial
Output |
Convenient Drinking Water for Organizations |
For Extra Contaminated Water |
14 Gallon Tank Included |
Restaurants, Offices, Large
Homes, Schools |
FDA & NSF Certified
Components |
Made in USA with U.S.
Premium Parts  |
Direct
from Original Manufacturer |
|
|
LITE-
180 GPD

$ 840
|
LITE-
240 GPD

$ 940
|
LITE-
360 GPD

$ 1040
|
The
360 GPD system requires a slightly higher input pressure (around 80
psi) to reach full 360 GPD flow rate. |

Plus receive a
FREE TDS meter !
$40 value
|
This
is our most durable reverse osmosis system with low pressure FILMTEC membranes
for compact commercial applications. The Light Commercial (LC) models
are super quiet and energy saving because they do not need pumps or electricity
and are driven by your water pressure alone.
This
system is built to last with convenient 20" industrial sized housings
and filters to eliminate frequent filter change-outs. We provide unmatchable
value in quality, convenience and price in this durable system. This is
the best valued commercial RO system if you
have good water pressure.
*Please
note that this sytem should not be installed at the main water line as
a whole-house water filter.
Trusted
Quality in Every Component
APEC's
5-stage reverse osmosis drinking water systems are designed to ensure durability
and purity. We are one of the very few manufacturers who still insists on using
only FDA/NSF certified parts made in the U.S. Ultra RO’s housings are made by
the best housing manufacturer PENTEK. Ultra RO’s heart, FILMTEC membranes,
are made by Dow Chemical for us, and it is known as the world’s most advanced
reverse osmosis membrane. An average APEC drinking water system lasts over 15
years. Ultra reverse osmosis water filter systems are known for bringing years
of enjoyment and good health to their owners.
Light
Commercial RO System Consists of:
| 1st
Stage | NSF
Osmonics 5 micron 20" high-capacity polypropylene sediment filter removes
dust, particles, and rust. | | 2nd
Stage | NSF
KX Extruded Carbon Block 10 micron 20" removes chlorine, odor,
organic contaminants, pesticides, and cysts. |
| 3rd
Stage | NSF
KX Extruded Carbon Block 10 micron 20" removes residual chlorine
and VOC, extends membrane life. | | 4th
Stage | FDA
Filmtec (Dow Chemical) High Rejection TFC membranes eliminates up to 99.9%
of most chemicals, dissolved solids, metals, bacteria, and viruses. |
| 5th
Stage | NSF
Omnipure TCR (Total Contamination Removal) Carbon 10" removes
any residual impurities and odors from the tank. | | Tank |
NSF
premium 14 gallon pressurized tank. |
| Faucet |
NSF
Lead-Free, long reach, goose neck faucet. |
| Tubing | NSF
Color-coded Food Grade tubing. | | Complete
Installation Hardware | Wrench,
feed water valve, drain saddle, inserts, teflon tape and manuals. |
Flow
Rate with Variable Pressure and Temperature:
When sizing
a system, particularly if system output is critical for you, you need
to understand that the actual flow rate GPD(Gallons Per Day) of any reverse
osmosis system depends on the input water pressure, temperature, and water
conditions. The higher your input water pressure and temperature, the
higher the pure water output. The industry standard*, which is the same
as our standard, is set at 60 psi pressure and 77° F(25° C) temperature.
Output at 77 °F VS. Various Input Water Pressure |
ITEM# |
40 psi |
50 psi |
60 psi |
70 psi |
80 psi |
RO-LITE-180 |
120 GPD |
150 GPD |
180 GPD |
220 GPD |
250 GPD |
RO-LITE-240 |
160 GPD |
200 GPD |
240 GPD |
280 GPD |
320
GPD |
RO-LITE-360 |
175 GPD |
220 GPD |
270 GPD |
317 GPD |
360 GPD |
*Please note that this standard is not necessarily followed
by all vendors. We
have seen other RO systems claiming 100 GPD at 100 psi very unrealistic
input water pressure! So do check on these facts before you make a buying
decision.
More
on water temperature: While the industry standard temperature is set
at 77 °F, we know that not everyone has 77 °F input water. Below
is a water temperature compensation chart for you to calculate the nominal
GPD of your RO system at different temperatures.
INSTRUCTIONS:
find your water temperature and its factor, divide the RO system GPD by
that factor, and you will get the temperature-corrected output .
|
°C |
3 |
5 |
7 |
9 |
11 |
13 |
15 |
17 |
19 |
21 |
23 |
25 |
27 |
29 |
31 |
33 |
35 |
37 |
|
°F |
37.4 |
41 |
44.6 |
48.2 |
51.8 |
55.4 |
59 |
62.6 |
66.2 |
69.8 |
73.4 |
77 |
80.6 |
84.2 |
87.8 |
91.4 |
95 |
98.4 |
|
FACTOR |
3.03 |
2.58 |
2.22 |
2 |
1.78 |
1.61 |
1.47 |
1.34 |
1.24 |
1.15 |
1.08 |
1 |
0.94 |
0.88 |
0.83 |
0.77 |
0.73 |
0.69 |
RO Membrane Nominal Rejection Guide
| Giardia cysts
|
|
Criptosporidium
cysts |
|
DDT |
| PCB |
| | E.coli
bacteria | 
|
Fecal bacteria
| 
|
Chlorinated Pesticides
| 
|
Radium |

|
| Arsenic
(+3/ +5) | 
|
Sodium Chloride
NaCl | 
|
Chromium (+3 /+
6) | 
|
Glucose
| 
|
| Sodium
| 
|
Nickel
| 
|
Chloride |

|
Copper
| 
|
| Potassium |

|
Zinc |

|
Bicarbonate |

|
Sulfate |

|
| Calcium
| 
|
Silica
SiO2 | 
|
Nitrate
3 | 
|
Chromate
|

|
| Magnesium
| 
|
Cadmium |

|
Fluoride |

|
Barium
| 
|
| Iron |

|
Silver |

|
Silicate |

|
Ammonium |

|
| Aluminum |

|
Mercury
| 
|
Phosphate |

|
Lead
| 
|
Ultra
Reverse Osmosis System Specifications:
| Drinking
Water Output |
180/240/360
gallons/day rated on 60-80 psi input water pressure
and 77 °F water temperature |
|
Minimum Pressure Requirement |
Minimum
50 psi water input pressure, 80 psi for 360 GPD System |
| Treatment
Stages |
5 |
| Output Tubing
Size |
3/8" |
|
Housings |
20" NSF US Filter Housings |
| Membrane
|
180
GPD model 2 membranes FDA FILMTEC TFC 90 gpd @60psi
240
GPD model 3 membranes FDA FILMTEC TFC 90 gpd @60psi
360 GPD model 4 membranes FDA FILMTEC TFC 90 gpd @60psi
|
| Weight
& Dim |
26
lbs, 15" x 8" x 29" (System)
24 lbs, 16 x 16x 22" (Tank) |
|